First, installation points
1. Before installing the rubber hose, check whether the surface of the hose has cracks, folds and other damage. If so, it should be replaced.
2. During the installation, avoid bending or twisting the hose excessively and ensure that both ends of the hose are securely connected to prevent the hose from falling off or leaking.
3. Before installation, the length and type of hose should be determined according to the actual demand, so as not to meet the requirements in use.
Second, use precautions
1. The pressure range of the rubber hose should be matched with the pipeline system to avoid too high or too low working pressure.
2. When in use, overload should be avoided and excessive force should be avoided on the rubber hose.
3. When the hose encounters suction or gate power failure, it should stop working immediately to avoid excessive pressure or damage to the hose.
Third, maintenance
1. Regular inspection should be carried out before use, and timely replacement or maintenance should be found to avoid dangerous accidents caused by hose problems.
2. In routine use, the hose should be kept clean and dry to avoid damage to the surface of the hose caused by oil, water and other substances.
3. When the rubber hose is aging, hardening, cracking and so on in use, it should be replaced in time to avoid the danger of aging the hose due to long-term use.
In short, the use of rubber hoses needs to follow certain specifications, and only by following these specifications can the role of rubber hoses be maximized to ensure the safety and stability of use.
