Under normal circumstances, the hydraulic hose is suitable for room temperature conditions and outdoor high temperature dust, the amplitude is very strong and a variety of disaster sites, while it can also be used in the case of flooding. The factors to consider are: the type of hose, the size of the hose, the length of the hose, the working pressure of the system, the fluid of the system and the environment used, please refer to the product standard for selection. But it is worth noting that in large water and very acidic humid air is not and long-term use. It is not suitable for use in the case of acid rain salt spray and various chemical dusts.
What is the hydraulic hose that people often talk about
Under normal circumstances, the ambient temperature needs to be controlled at twenty to forty degrees, and the hydraulic hose has a good working principle. Hydraulic hose joint with high-quality carbon steel or stainless steel choice, the use of advanced clamping equipment and technology. Ultra-high pressure hoses are also widely used in our daily life. There are many types of high-pressure water cleaning joints, and the appropriate joint should be selected, and the sleeve design should be standard and reasonable. Sharp grooves and irregular dimensions can break the wire reinforcement. When clamping the joint, the clamping amount should be determined according to the inner and outer diameter of the hose. High pressure resistance, dust resistance and corrosion resistance, and pressure resistance is very good, can reach 25 kpa. The surface is very shiny, the streamline is very good, and the special structure of dust prevention: capsule, flagella, fimbriae are also quite in place. It is also very good for the change of thermal expansion and cold contraction and indoor temperature difference, and it is easy to operate in the installation method. The epoxy coated plastic layer of the hydraulic hose can treat the input water well, bury the pipe, prevent the corrosion of various heavy hydraulic components in the water to the inner wall of the pipe, and at the same time, the service life is greatly enhanced.
