Firstly, the principles and precautions for selecting length
When selecting the length of rubber hoses, the following principles and precautions should be considered:
1. Usage requirements. Choose the appropriate length based on actual usage needs. For example, if material transportation needs to be carried out between two points, it is necessary to choose an appropriate length so that the material can be smoothly transported to the other party; If it needs to be used as a gas output pipeline, it is necessary to choose a length that can meet the output requirements.
2. Production capacity. The production capacity of rubber hoses is also an important consideration factor. According to different production capacities, different lengths of rubber hoses can be selected. When selecting the length, factors such as flow loss inside the rubber hose and its load-bearing capacity should be considered.
3. Logistics requirements. The selected length for logistics transportation should be based on different transportation methods to avoid unnecessary losses and waste during the transportation process.
Secondly, the selection of rubber hose length
Based on the actual situation and the above principles and precautions, it is recommended that the length of the rubber hose be selected to be greater than 10 meters. Normally, a length of less than 10 meters is suitable for conveying materials of less than 5 tons per hour, while a length of 10 to 20 meters is suitable for conveying materials of 5-15 tons per hour; A length of over 20 meters is suitable for conveying larger quantities of materials. At the same time, attention should be paid to considering production capacity and logistics needs to avoid unnecessary waste and losses.
When selecting the length of rubber hoses, it is necessary to combine actual needs and situations to determine a reasonable length. At the same time, attention should also be paid to adhering to usage principles and relevant precautions to prevent losses and waste. Based on experience, it is recommended that the length of rubber hoses should be greater than 10 meters, but this is only an empirical estimate and needs to be measured and selected according to specific situations in actual use.
